COMPANY HEADER
Print Back
Parker ISO Conversion Fittings are designed to the highest quality standards to allow connections between components and systems which use both NPT and ISO Thread configurations. Conversion fittings are maintained under strict quality control programs.

NOTE:
  • Bonded seal page 26 must be used on BSPP end shown.
  • Please note the pressure ratings are based on taper threaded ends. The pressure rating for the BSPP ends are dependent on the type of sealing washer used.
    • BSPP Parallel Male Hex Pipe Plug
    Unit of Measure
    Items BSPP Parallel Male Hex Pipe Plug
    2R PH
    BSPP Parallel Male Hex Pipe Plug     		BSPP Parallel Male Hex Pipe Plug
    4R PH
    BSPP Parallel Male Hex Pipe Plug     		BSPP Parallel Male Hex Pipe Plug
    6R PH
    BSPP Parallel Male Hex Pipe Plug     		BSPP Parallel Male Hex Pipe Plug
    8R PH
    BSPP Parallel Male Hex Pipe Plug     		BSPP Parallel Male Hex Pipe Plug
    12R PH
    BSPP Parallel Male Hex Pipe Plug
    Connection Type N/A BSPP
    BSPP Thread T1 N/A 1/8-28 N/A 1/4-19 N/A 3/8-19 N/A 1/2-14 N/A 3/4-14
    W HEX N/A 9/16 in N/A 3/4 in N/A 7/8 in N/A 1 1/16 in N/A 1 5/16 in
    D N/A .55 in N/A .78 in N/A .78 in N/A .99 in N/A 1.13 in
    R N/A .28 in N/A .44 in N/A .44 in N/A .56 in N/A .63 in
    Working Pressure (Brass) N/A 5000 psi340 bar N/A 4000 psi280 bar N/A 3900 psi270 bar N/A 3800 psi260 bar N/A 3600 psi250 bar
    Working Pressure (Stainless Steel) N/A 9100 psi630 bar N/A 7500 psi520 bar N/A 7200 psi500 bar N/A 6600 psi460 bar N/A 6400 psi440 bar